Different types of coatings have different intervals. Xsprayer reminds you that during the construction period, you must carry out the construction according to each coating, such as brush coating, roll coating, high-pressure airless spraying, etc. here is a detailed introduction for you!
First, remember to brush：Basically, when we use the paint brush for painting, xsprayer suggests that the painting direction should be the best, but first up and down, then left and right. Moreover, during construction, the paint brush should not dip too much to prevent dripping. Basically, when painting heavy anti-corrosion coating, the paint brush distance shall not be too large to avoid too thin paint film.
Basically, when we use the paint brush for painting, xsprayer suggests that the painting direction should be the best, but first up and down, then left and right. Moreover, during construction, the paint brush should not dip too much to prevent dripping. Basically, when painting heavy anti-corrosion coating, the paint brush distance shall not be too large to avoid too thin paint film.
Second, remember to roll coating：Basically, in the process of coating with its roller, the paint dipped on the roller shall be evenly distributed. And basically in the process of coating, the rolling speed should be maintained at a certain speed, not too fast.
Third, remember high-pressure airless spraying：In fact, this is the fastest coating method, and according to xsprayer professional technicians, high-pressure airless spraying can obtain a very thick paint film. Therefore, many times, in order to better achieve the specified film thickness, it is suggested that we can adopt the construction method of airless spraying.
Post time: Mar-26-2022